CH4_Controller Panel Operation_Fanuc Milling
today
2024-10-29
local_offer
Fanuc Milling
visibility
467
4. Controller Panel Operation
4.1 Controller Panel Introduction
4.1.1 Controller Panel Description
4.2 Program Edit
4.2.1 Enter Program Edit Mode
(1) Change the mode to【EDIT】mode
(2) Change the program lock 【3】
(3) Press【PROG】of Main Function Keys area,
and it will change to program inspection window
4.2.2 New Program Number and Comment
(1) New program number O0703, Key in “O” first and key in number “0703”
(2) Press【INSERT】Key, to add new program
(3) Key in the comment, e.g. (075-780203-A)
Note: CNC controller would regard the words in parenthesis as comment
and will not be executed.
The parenthesis can be found in Operation Button Area
Press【OPRT】> Press【 】(twice) >
Press【KEYINP】to find the parenthesis
(4) Press【CAN】Key, to delete last character when the key input buffer displays
(5) Press【EOB】and the symbol“;”will appear
(6) Press【INSERT】key, then insert the comment
4.2.3 Add New Program Content
(1) Move cursor to key in the NC code in the program content
e.g. N1 G17 G40 G49 G80;M06 T01 S500;
(2) Afte key in the above NC code, press【INSERT】to insert the NC code
(3) Continue to key in the NC code
e.g. G54 G90 G00 X30. Y10. M03;
4.2.4 Change Program Content【ALTER】
e.g. Change T01 to T02
(1) When the program content need to be changed,
move corsur to the change NC code position
(2) Key in NC code “T02”
(3) Press【ALTER】program change key,
then NC code will be replaced to T02
4.2.5 Delete Program Content【DELETE】
(1) Press【DELETE】to delete the program content
(2) Delete the code that is seleted by cursor
文章區塊