CH4_Controller Panel Operation_Siemens Turning
today
2024-11-21
local_offer
Siemens Turning
visibility
428
4. Controller Panel Operation
4.1 Function Introduction
4.1.1 Button Description
4.2 Edit Program
4.2.1 Program management
Edit, execute, modify, copy or rename the program anytime with program Manager.
Delete the necessary program to release more storage.
(1) Click [Category function display button]
(2) Due to the default setting of [Program Editing Lock] is level [1], therefore it is unavailable to add new NC code. Switch [Program Editing Lock] to level[3]
4.2.2 New Program Number and Comment
(1) Click the【New File】button of [Vertical Software Button]
in [Workpieces] folder
(2) Key in the file name e.g.NC1011
(3) Click【OK】
4.2.3 Add Program Content
E.g.
N1
G291
G92 S2500
T0101 ;(R0.8) (CNMG120408)
G96 S180 M03
G0 X62. Z3. M08
(1) Move the cursor and key in NC Code in the content, N1
(2) Click and it will show up the newline symbol “¶”
(3) Repeat step(1) and (2), key in the NC code
e.g. For the space symbol, click
4.2.4 Copy, paste program content
(1) Move the cursor to the beginning of the needing block,
click【Mark】of [Vertical Software Button] or
the of 【cursor and [PageUp] [PageDown] Button】
(2) Move cursor to select the needed block
(3) Click【Copy】
(4) Move cursor to the needed position and click【Paste】
4.2.5 Program Content Delete
(1) Move cursor to the beginning of deleting block,
click 【Mark】of [Vertical Software button] or
[ Cursor and switch page]
(2) Move cursor to select the deleting block
(3) Click【DEL】
文章區塊