Software 2024 Update Details_VM DT TM Fanuc Turning, TurnMill

VM2024_0i-TF

1.1 Added G71 G72 G73 Alarm

1.2 Added G74 G75 Alarm

1.3 Added adjustable controller screen position feature

2.1 Fixed G41 G42 calculation error

1.1 Added M-code setting

1.1 Inner diameter rhombic insert, triangular insert, and diamond-shaped insert now have chamfering and a 7° included angle

1.2 TF/TF plus/31i added system parameters 5101 5114

2.1 Fixed G83

1.1 Added M-codes: M07 Coolant ON, M28 Rigid Tapping OFF

1.1 During automatic simulation, sound will not play when speed exceeds 500%

1.2 Combined operation panel 387-348-319-040, added foot pedal function

1.3 Material Setting -> Workpiece Flip -> Foot Switch Button, can be controlled using TM foot pedal

2.1 G71 G72 cutting depth (W) = 0 parsing correction

2.2 Fixed starting point offset issue in G71

2.1 Fixed reading issue of G71 G72 G73 P Q

1.1 Lathe material setting adds chuck setting

1.2 Updated icons for lathe material setting and chuck setting

1.3 Lathe default uses soft jaws

1.4 Only numeric input allowed in material size setting fields

1.5 Thread measurement adds pitch diameter parallel line

1.6 Operation interface response optimization

1.7 【OK】button split into【Apply】and【Close】

1.8 Progress bar displayed when applying

1.9 Removed “J” from chuck setting

1.10 Executing CNC command actions now writes to MACRO system variables (4xxx)

1.11 Fanuc import/export adds system program directory

1.12 Added system program directory CNCProgram_FANUC_SYSTEM\ ; all files are encrypted

1.13 Added parameter 3202

1.14 Added parameter 3202 #0 NE8, #4 NE9 functionality

2.2 Fixed MDI issue

2.1 Button name corrected to ALL

2.2 Simplified Chinese interface text correction

1.1 Added parameters 3210, 3211

1.1 Tool calibration arm function changed

2.1 【Material Auto Restore】function fix

2.2 Fixed issue where using G41 G42 in the previous block before a loop caused incorrect offset

VM2024_0i-TF_Plus

1.1 Added G71 G72 G73 Alarm

1.2 Added G74 G75 Alarm

1.1 Added M-code setting

1.1 Inner diameter rhombic insert, triangular insert, and diamond-shaped insert now have chamfering and a 7° included angle

1.2 TF/TF plus/31i added system parameters 5101 5114

2.1 Fixed G83

1.1 Added M-codes: M07 Coolant ON, M28 Rigid Tapping OFF

1.1 No sound playback when automatic simulation speed exceeds 500%

1.2 Combined operation panel 387-348-319-040, added foot pedal function

1.3 Material Setting -> Workpiece Flip -> Foot Switch Button, can be controlled using TM foot pedal

1.4 On controller screen, after pressing PROG, the program screen shows one-fourth view; press PROG again to switch to full view

2.1 G71 G72 cutting depth (W) = 0 parsing correction

2.2 Fixed starting point offset issue in G71

2.1 Fixed reading issue of G71 G72 G73 P Q

1.1 Lathe material setting adds chuck setting

1.2 Updated icons for lathe material setting and chuck setting

1.3 Lathe default uses soft jaws

1.4 Only numeric input allowed in material size setting fields

1.5 Thread measurement adds pitch diameter parallel line

1.6 Operation interface response optimization

1.7 【OK】button split into【Apply】and【Close】

1.8 Progress bar displayed when applying

1.9 Removed “J” from chuck setting

1.10 Executing CNC command actions now writes to MACRO system variables (4xxx)

1.11 Fanuc import/export adds system program directory

1.12 Added system program directory CNCProgram_FANUC_SYSTEM\ ; all files are encrypted

1.13 Added parameter 3202

1.14 Added parameter 3202 #0 NE8, #4 NE9 functionality

2.2 Fixed MDI issue

1.1 Added SYSTEM parameter search function

2.1 Updated language file

2.1 Button name corrected to ALL

2.2 Simplified Chinese interface text correction

2.3 Updated language file

1.1 Added parameters 3210, 3211

1.1 Tool calibration arm function changed

2.1 【Material Auto Restore】function fix

2.2 Fixed issue where using G41 G42 in the previous block before a loop caused incorrect offset

VM2024_0i-TF+C

1.1 Add function: Input O-code + program number + soft key [Delete] (EDIT mode)

1.2 Add function: Cursor select program number + soft key [Delete] (EDIT mode)

1.3 In non-EDIT mode, press soft key [Delete], prompt message “WRONG MODE”

1.4 In AUTO mode, press RESET to return to program start

1.1 Add alarms for G71 G72 G73

1.2 Add alarms for G74 G75

2.1 Fixed calculation errors for G41 G42

1.1 Added M-code setting

1.1 Added chamfer for internal diamond/triangle/peach insert, 7° included angle

1.2 Added system parameters 5101, 5114 for TF/TF Plus/31i

2.1 Pressing [Material Setting] directly opens the material setting page

1.1 In M45 milling mode, press spindle CW/CCW to rotate power turret

2.1 Fixed G83

2.2 Fixed M3 M4 M5 power tool control in M45 milling mode

1.1 Added M-code: M07 (Coolant ON), M28 (Rigid Tapping OFF)

1.1 No sound when simulation speed >500%

1.2 Combo operation panel 387-348-319-040 adds foot pedal function

1.3 Material Setting -> Workpiece Flip -> Foot Switch button can be controlled via TM pedal

2.1 Fixed G71 G72 when depth of cut (W) = 0

2.2 Fixed starting point offset in G71

1.1 Enhanced main menu smoothness

2.1 Fixed software check number for TM TF+C

2.1 Fixed reading of P Q in G71 G72 G73

1.1 Added chuck setting in lathe material settings

1.2 Updated icons for lathe material and chuck settings

1.3 Default lathe uses soft jaws

1.4 Material size fields only accept numbers

1.5 Added pitch diameter parallel lines in thread measurement

1.6 Optimized UI response

1.7 【OK】button split into【Apply】and【Close】

1.8 Show progress bar on apply

1.9 Removed “J” from chuck settings

1.10 Executing CNC commands writes to MACRO system variable (4xxx)

1.11 Fanuc import/export adds system program folder

1.12 New system program folder CNCProgram_FANUC_SYSTEM\ for encrypted files

1.13 Added parameter 3202

1.14 Parameter 3202: #0 NE8, #4 NE9 functionality

1.15 Added disc milling tool for mill-turn

2.2 Fixed MDI issue

2.1 Button name changed to ALL

2.2 Simplified Chinese UI text corrections

1.1 Added parameters 3210, 3211

1.1 Tool setter arm function modified

2.1 Fixed【Material Auto Restore】function

2.2 Fixed G41 G42 offset error in previous block before cycle

VM2024_0i-TF+C+Y

1.1 Add function: Input O-code + program number + soft key [Delete] (EDIT mode)

1.2 Add function: Cursor select program number + soft key [Delete] (EDIT mode)

1.3 In non-EDIT mode, press soft key [Delete], prompt message “WRONG MODE”

1.4 In AUTO mode, press RESET to return to program start

1.1 Add alarms for G71 G72 G73

1.2 Add alarms for G74 G75

2.1 Fixed calculation errors for G41 G42

1.1 Added M-code setting

1.1 Added chamfer for internal diamond/triangle/peach insert, 7° included angle

1.2 Added system parameters 5101, 5114 for TF/TF Plus/31i

2.1 Pressing [Material Setting] directly opens the material setting page

1.1 In M45 milling mode, press spindle CW/CCW to rotate power turret

2.1 Fixed G83

2.2 Fixed M3 M4 M5 power tool control in M45 milling mode

1.1 Added M-code: M07 (Coolant ON), M28 (Rigid Tapping OFF)

1.1 No sound when simulation speed >500%

1.2 Combo operation panel 387-348-319-040 adds foot pedal function

1.3 Material Setting -> Workpiece Flip -> Foot Switch button can be controlled via TM pedal

2.1 Fixed G71 G72 when depth of cut (W) = 0

2.2 Fixed starting point offset in G71

1.1 Enhanced main menu smoothness

2.1 Fixed software check number for TM TF+C

2.1 Fixed reading of P Q in G71 G72 G73

1.1 Added chuck setting in lathe material settings

1.2 Updated icons for lathe material and chuck settings

1.3 Default lathe uses soft jaws

1.4 Material size fields only accept numbers

1.5 Added pitch diameter parallel lines in thread measurement

1.6 Optimized UI response

1.7 【OK】button split into【Apply】and【Close】

1.8 Show progress bar on apply

1.9 Removed “J” from chuck settings

1.10 Executing CNC commands writes to MACRO system variable (4xxx)

1.11 Fanuc import/export adds system program folder

1.12 New system program folder CNCProgram_FANUC_SYSTEM\ for encrypted files

1.13 Added parameter 3202

1.14 Parameter 3202: #0 NE8, #4 NE9 functionality

1.15 Added disc milling tool for mill-turn

2.2 Fixed MDI issue

2.1 Button name changed to ALL

2.2 Simplified Chinese UI text corrections

1.1 Added parameters 3210, 3211

1.1 Tool setter arm function modified

2.1 Fixed【Material Auto Restore】function

2.2 Fixed G41 G42 offset error in previous block before cycle

VM2024_0i-TF_Plus+C

1.1 Add function: Input O-code + program number + soft key [Delete] (EDIT mode)

1.2 Add function: Cursor select program number + soft key [Delete] (EDIT mode)

1.3 In non-EDIT mode, press soft key [Delete], prompt message “WRONG MODE”

1.4 In AUTO mode, press RESET to return to program start

2.1 Fixed default file name for environment file

1.1 Added alarms for G71 G72 G73

1.2 Added alarms for G74 G75

2.1 Fixed calculation errors for G41 G42

1.1 Added M-code setting

1.1 Added chamfer for internal diamond/triangle/peach insert, 7° included angle

1.2 Added system parameters 5101, 5114 for TF / TF Plus / 31i

2.1 Pressing [Material Setting] directly displays the material setting page

1.1 In M45 milling mode, press spindle CW/CCW to rotate power turret

2.1 Fixed G83

2.2 Fixed M3 M4 M5 power tool control in M45 milling mode

1.1 Added M-code: M07 (Coolant ON), M28 (Rigid Tapping OFF)

1.1 No sound when simulation speed >500%

1.2 Combo operation panel 387-348-319-040 adds foot pedal function

1.3 Material Setting -> Workpiece Flip -> Foot Switch button can be controlled via TM pedal

1.4 In controller screen, press PROG once to show 1/4 screen, press again to show full program view

2.1 Fixed G71 G72 when depth of cut (W) = 0

2.2 Fixed G71 starting point offset

2.1 Fixed reading of P Q in G71 G72 G73

1.1 Added chuck setting in lathe material settings

1.2 Updated icons for lathe material and chuck settings

1.3 Default lathe uses soft jaws

1.4 Material size fields only accept numeric input

1.5 Added pitch diameter parallel lines in thread measurement

1.6 Optimized UI response

1.7 【OK】button split into【Apply】and【Close】

1.8 Show progress bar on apply

1.9 Removed “J” from chuck settings

1.10 Executing CNC commands writes to MACRO system variable (4xxx)

1.11 Fanuc import/export adds system program folder

1.12 New system program folder CNCProgram_FANUC_SYSTEM\ for encrypted files

1.13 Added parameter 3202

1.14 Parameter 3202: #0 NE8, #4 NE9 functionality

1.15 Added disc milling tool for mill-turn

2.2 Fixed MDI issue

1.1 Added SYSTEM parameter search function

2.1 Updated language files

2.1 Button name changed to ALL

2.2 Simplified Chinese UI text corrections

2.3 Updated language files

1.1 Added parameters 3210, 3211

2.1 Fixed jaw installation simulation

1.1 Modified tool setter arm function

2.1 Fixed【Material Auto Restore】function

2.2 Fixed G41 G42 offset error in previous block before cycle

VM2024_0i-TF_Plus+C+Y

1.1 Added function: Input O-code + Program Number + software key [Delete] (EDIT mode)

1.2 Added function: Cursor selects Program Number + software key [Delete] (EDIT mode)

1.3 In non-EDIT mode, executing software key [Delete] displays "WRONG MODE" message

1.4 In AUTO mode, pressing RESET returns to the beginning of the program

2.1 Default file name of environment file corrected

1.1 Added alarms for G71, G72, G73

1.2 Added alarms for G74, G75

2.1 Fixed G41/G42 calculation errors

1.1 Added M-code setting

1.1 Inner diameter diamond-shaped tool, triangular tool, and peach-shaped tool inserts now include chamfering with a 7° included angle

1.2 Added system parameters 5101 and 5114 for TF / TF plus / 31i

2.1 Pressing [Material Setting] directly shows the material setting page

1.1 In M45 milling mode, pressing the spindle CW/CCW button rotates the live tool turret

2.1 Fixed G83

2.2 Fixed M45 milling mode live tool rotation control for M3, M4, M5

1.1 Added M-codes: M07 for coolant ON, M28 for rigid tapping OFF

1.1 During auto simulation, no sound is played when speed > 500%

1.2 Combined control panel 387-348-319-040 now supports foot pedal

1.3 Material Setting → Workpiece Turnaround → Footswitch button can be controlled using TM foot pedal

1.4 In controller screen, pressing PROG shows program in one-quarter screen; press again to show full-screen program

2.1 Fixed interpretation when G71/G72 depth of cut (W) = 0

2.2 Fixed G71 start point offset

2.1 Fixed G71, G72, G73 P Q read issue

1.1 Added chuck setting in lathe material setting

1.2 Updated icons for lathe material and chuck settings

1.3 Lathe defaults to using soft jaws

1.4 Material size input fields accept only numeric values

1.5 Thread measurement now includes minor diameter parallel lines

1.6 Improved response of the operation interface

1.7 【Confirm】button split into 【Apply】 and 【Close】

1.8 Progress bar displayed during Apply

1.9 Removed "J" from chuck setting

1.10 CNC command execution writes to MACRO system variables (4xxx)

1.11 Fanuc import/export adds system program directory

1.12 Added system program directory CNCProgram_FANUC_SYSTEM\ where contents are encrypted

1.13 Added parameter 3202

1.14 Parameter 3202 #0 NE8 and #4 NE9 functions added

1.15 Added disc-type thread milling tool in mill-turn compound

2.2 Fixed MDI issue

1.1 Added SYSTEM parameter search function

2.1 Updated language files

2.1 Button name corrected to ALL

2.2 Corrected Simplified Chinese UI text

2.3 Updated language files

1.1 Added parameters 3210, 3211

2.1 Fixed chuck installation simulation

1.1 Changed tool setter arm function

2.1 Fixed 【Material Auto Restore】 function

2.2 Fixed offset error when using G41/G42 before a looped block