Software 2024 Update Details_VM DT TM Siemens Milling, 4 Axis, 5 Axis

VM2024_828D_Mill

1.1 Added JOG > FACEMILL function

1.2 Supports input in .5 numeric format

2.1 Fixed CYCLE72 Approach: Straight function

2.2 Fixed G41 G42 offset error

2.3 Fixed CYCLE72 tool retraction position

2.4 Fixed F value display issue

2.5 MPG functions properly under imperial units

2.6 JOG and MPG function properly under imperial units

2.7 Pressing INPUT jumps to the next field

2.8 Fixed program name renaming function

2.9 Fixed contour direction causing boss offset error

2.10 Fixed imperial material interface

2.11 Modified executable name for multi-system switching

2.12 Fixed workpiece coordinate system setting function

1.1 Modified material setting interface

2.1 Fixed NC program loading path

2.1 Fixed drawing behavior for arc contour

VM2024_840D_Mill

2.1 Extended measurement line between two parallel surfaces

2.1 Adjusted workpiece measurement motion

1.1 Tool returns to zero point and sound switch setting are not loaded when loading environment

2.1 Manual workpiece measurement supports different measurement sequences

2.2 Automatic workpiece measurement supports different measurement sequences

2.1 For workpiece measurement, selecting X- and pressing cycle start should move to the left

2.2 Resolved SetW0 display issue

2.3 Completed automatic workpiece measurement with two-side measurement function

2.1 Fixed G90 G91 determination

2.1 Fixed handwheel feedrate in imperial mode

2.1 Fixed measurement mode determination issue

2.1 Fixed metric/imperial switch error

2.2 Screen unit handling during metric/imperial switch

2.3 Field value conversion handling during metric/imperial switch

2.4 F value display during program execution

1.1 Added Alarm 61945

2.1 Fixed issue where CYCLE76 parameter DZ max cutting depth = 0 caused failure to cut downwards; now if DZ = 0, it directly cuts to Z1 depth

2.2 Fixed tapping feedrate calculation error

2.3 Fixed G4142

2.4 Fixed arc remaining move distance calculation error

2.5 Fixed fixture STL file saving for newly added fixtures

2.6 Warning displayed when selecting faulty fixture

2.7 Fixed imperial example errors

2.1 Fixed issues in imperial environment

2.2 Fixed ball-end mill creation function

1.1 Supported R-variable function added in examples E_MI_CON, E_PO_CIR

2.1 Adjusted measurement function

2.2 Fixed automatic detection function

2.3 Adjusted controller dialog; default input method no longer switches to Chinese

1.1 Added Dragon Year example environment file

2.1 After renaming file, cursor remains at original position

1.1 Added JOG > FACEMILL function

1.2 Supports input in .5 numeric format

2.1 Fixed CYCLE72 Approach: Straight function

2.2 Fixed G41 G42 offset error

2.3 Fixed CYCLE72 tool retraction position

2.4 Fixed F value display issue

2.5 MPG functions properly under imperial units

2.6 JOG and MPG function properly under imperial units

2.7 Pressing INPUT jumps to the next field

2.8 Fixed program name renaming function

2.9 Fixed contour direction causing boss offset error

2.10 Fixed imperial material interface

2.11 Modified executable name for multi-system switching

2.12 Fixed workpiece coordinate system setting function

1.1 Adjusted software operation interface

1.1 Modified material setting interface

2.1 Fixed NC program loading path

2.1 Fixed arc contour drawing behavior

VM2024_840D+4A

2.1 Spindle speed upper limit now functions according to settings

2.1 Fixed issue with measurement mode determination

2.1 Fixed error when switching between metric and imperial units

1.1 Added Alarm 61945

2.1 Fixed issue where CYCLE76 with parameter DZ (max feed depth) = 0 would prevent downward cut; updated to cut directly to Z1 drill depth when DZ = 0

2.2 Fixed tapping feedrate calculation error

2.3 Fixed G4142

2.4 Fixed arc remaining move distance calculation error

2.5 Fixed STL file saving issue for new fixtures

2.6 Display warning when selecting faulty fixture

2.1 Fixed issues in imperial environment

2.2 Fixed ball-end mill creation function

1.1 Supported examples E_MI_CON, E_PO_CIR with added R variable functionality

2.1 Adjusted measurement functions

2.2 Fixed automatic detection function

2.3 Adjusted controller dialog to prevent default input method from switching to Chinese

2.1 Cursor remains in original position after renaming file

1.1 Added JOG > FACEMILL function

1.2 Supported numeric input in .5 format

2.1 Fixed CYCLE72 Approach: Straight function

2.2 Fixed G41 G42 offset error

2.3 Fixed CYCLE72 retraction position per pass

2.4 Fixed issue with F value display

2.5 MPG functions properly under imperial units

2.6 JOG and MPG work properly under imperial units

2.7 INPUT key jumps to next field

2.8 Fixed program renaming function

2.9 Fixed boss offset error caused by contour direction

2.10 Fixed imperial material interface

2.11 Modified executable names for multi-system switching

2.12 Fixed workpiece coordinate system setup function

1.1 Adjusted software UI interface

2.1 Fixed KEYPRO software license check issue

1.1 Updated material settings interface

2.1 Fixed NC program loading path

VM2024_840D-5A(TATC)

1.1 Added example environment file

2.1 In workpiece measurement, when selecting X-, pressing cycle start should move left

2.1 Fixed G90 G91 detection

2.1 Spindle speed limit operates as configured

2.1 Fixed issue with measurement mode detection

2.1 Fixed unit switching between metric and imperial

2.2 Handled screen unit display during unit switching

2.3 Handled value conversion during unit switching

2.4 Fixed F value display during program execution

1.1 Added Alarm 61945

2.1 In CYCLE76, if parameter DZ (max cutting depth) = 0, it couldn't cut downward. Now fixed to directly drill to Z1 depth when DZ = 0

2.2 Fixed tapping feedrate calculation error

2.3 Fixed G4142

2.4 Fixed arc residual movement calculation error

2.5 Fixed STL file saving when adding new fixtures

2.6 Warning displays when selecting a faulty fixture

2.1 Fixed issues in imperial environment

2.2 Fixed ball-end tool creation function

1.1 Supported examples E_MI_CON and E_PO_CIR now support new R variable

2.1 Adjusted measurement function

2.2 Fixed auto-detection function

2.3 Adjusted controller dialog; default input method no longer switches to Chinese

2.1 Cycle800 90-degree function now works

2.2 Fixed TRIORI G0 movement calculation

2.1 After renaming a file, the cursor remains at the original position

1.1 Added JOG > FACEMILL function

1.2 Supported ".5" format for numerical inputs

2.1 Fixed CYCLE72 Approach: Straight functionality

2.2 Fixed G41 G42 offset error

2.3 Fixed CYCLE72 tool retraction position

2.4 Fixed F value display issue

2.5 MPG operates correctly under imperial units

2.6 JOG and MPG operate correctly under imperial units

2.7 Pressing INPUT jumps to the next field

2.8 Fixed program renaming functionality

2.9 Fixed protrusion offset error caused by contour direction

2.10 Fixed interface for imperial materials

2.11 Modified executable file names for multi-system switching

2.12 Fixed workpiece coordinate system setting function

1.1 Adjusted software user interface

1.1 Updated material setting interface

2.1 Fixed NC program path loading

2.1 Fixed drawing behavior for arc contour

VM2024_840D-5A(TBTC)

2.1 Workpiece measurement: when selecting X-, it should move to the left after pressing cycle start

2.1 Fixed G90/G91 judgment

2.1 Spindle speed limit functions according to settings

2.1 Fixed issue with determining measurement mode

2.1 Fixed metric/imperial switching error

2.2 Unit display handling for metric/imperial switching

2.3 Field value conversion for metric/imperial switching

2.4 F display handling during program execution

1.1 Added Alarm 61945

2.1 CYCLE76: When parameter DZ (max feed depth) = 0, it cannot cut downward and causes an error; fixed to cut directly to Z1 drilling depth when DZ = 0

2.2 Fixed threading feed calculation error

2.3 Fixed G4142

2.4 Fixed arc residual movement calculation error

2.5 Added new fixture, fixed STL file saving

2.6 Warning displayed when selecting faulty fixture

2.1 Fixed imperial unit environment issue

2.2 Fixed ball end mill creation feature

1.1 Supported examples E_MI_CON and E_PO_CIR with new R variable feature

2.1 Adjusted measurement function

2.2 Fixed auto-detection function

2.3 Adjusted controller dialog; default input method will no longer switch to Chinese

2.1 Cycle800 90-degree function is effective

2.2 Fixed TRIORI G0 movement calculation

2.1 After renaming the file, the cursor remains at the original position

1.1 Added JOG > FACEMILL function

1.2 Supported numeric input in .5 format

2.1 Fixed CYCLE72 Approach: Straight function

2.2 Fixed G41/G42 offset error

2.3 Fixed CYCLE72 tool retract position for each cut

2.4 Fixed F value display issue

2.5 MPG functions properly in imperial units

2.6 JOG and MPG function properly in imperial units

2.7 INPUT button now moves to the next field

2.8 Fixed program renaming function

2.9 Fixed boss offset error caused by contour direction

2.10 Fixed interface for imperial material selection

2.11 Modified executable name for multi-system switching

2.12 Fixed workpiece coordinate system setting function

1.1 Adjusted software operation interface

1.1 Changed material setting interface

2.1 Fixed path loading for NC programs

2.1 Fixed drawing behavior for arc contour